True Gasket Part Numbers: Reading 810803, 810719 and the Rest
Why two T-49 units built four years apart take different gaskets, how to read a True part number, and how to check yours before you order the wrong one.
Quick answer: True part 810803 is the door gasket for older True T-49 and T-49F reach-in refrigerators, typically units built before 2005. True switched the same door to part 810719 partway through that year, so two T-49F units with the identical model plate can need two different gaskets depending on the build date stamped inside the door.
That split is the single most common thing that trips up kitchen managers ordering a True door gasket. You pull the model number off the data plate, search it, and get two part numbers back with no obvious way to tell which one fits your door. This breakdown of True gasket part numbers walks through how True numbers its gaskets, where the mid-production splits happen, and how to confirm fit before you order. For gasket replacement on True equipment in Boulder County kitchens, True gasket replacement in Boulder County is handled directly by The Gasketeers, who track which part fits which build year.
How a True gasket part number is structured
A True gasket part number is a six-digit code with no letters, and it identifies one exact seal profile, thickness, and attachment style built for a specific door opening, not a model name. True reuses the same gasket across several model variants when the door dimensions match, which is why one part number can cover a GDM-19 and a GDM-23 alongside a T-49 built in the same era.
On a True T-49 reach-in refrigerator, that gasket seals a single door against frost and lost cold air; swapping it falls under routine reach-in cooler and freezer gaskets work, not a full unit replacement. Because the part number tracks the door rather than the model sticker, two units with the exact same model name can still need two different gaskets if True changed the door hardware or seal profile partway through production.
Need a gasket replaced?
Call us or send your unit's model number. Free quotes across Boulder County, usually same week.
True updated at least two gasket profiles mid-run without changing the model number on the unit, which is exactly why a single model search turns up two parts. According to Parts Town's True parts documentation, the switch happened on the T-49F door in 2005 and on the GDM-35 door in 2009.
T-49 and T-49F
True T-49 and T-49F units built before 2005 use gasket 810803. Units built from 2005 onward use 810719 instead, on the same door opening. The profile and mounting style both changed, so 810803 will not snap into a door built for 810719, even though the two look similar at a glance.
GDM-35
The True GDM-35 glass merchandiser had a similar swap: units built before 2009 take gasket 811134, and units from 2009 forward take 810807. The same model number, GDM-35, spans both parts depending on build date.
Model
Earlier Part
Later Part
Change Year
T-49 / T-49F
810803
810719
2005
GDM-35
811134
810807
2009
Reading your True data plate to date the build
The data plate inside the door frame is the fastest way to tell which side of a mid-production split your unit falls on. True stamps the model number, serial number, and a date code on this plate, usually mounted on the interior door frame or the compressor compartment wall.
The serial number on most True units embeds a build date, though the format has changed across eras. Rather than decode it yourself, photograph the full plate and send it along with your model number; matching the part to the actual build date takes seconds once that information is in hand.
The True gasket parts we keep in stock
The Gasketeers keep the most frequently requested True profiles on hand, including gaskets used on T-49, T-49F, GDM-49, GDM-35, and T-72 units, so a straightforward swap doesn't have to wait on a special order. Less common profiles and older, discontinued doors still get sourced or custom-fabricated from the old seal, just on a slightly longer timeline.
Call ahead with your model and part number if you need a same-visit swap; we'll confirm what's on the shelf before a technician heads out.
Prep tables and back-bar coolers: a different numbering pattern
True's TSSU and TUC prep tables, and its TBB back-bar units, don't follow the same reach-in numbering logic because they often seal two surfaces instead of one. A prep table like the TSSU typically needs a gasket on both the lid over the cold pan rail and a separate gasket on the base door, and those two gaskets usually carry different part numbers even on the same unit.
Back-bar coolers in the TBB line add a third variable: door height varies by configuration, so the same nominal model can ship with more than one door size depending on how it was ordered. Treat every prep table and back-bar gasket as its own lookup rather than assuming the base door part also fits the lid.
Checking fitment before you order a True 810803 or 810719 gasket
Always confirm a True gasket part number against the actual door opening before ordering, because part numbers can vary by sub-model and production date even under the same nominal model number. Measure the door's height and width at the gasket channel, and photograph the gasket's cross-section where it's worn or cracked.
Three checks catch almost every mismatch:
Match the model number and the build year or serial date, not the model number alone.
Compare the gasket's mounting style: snap-in profiles and screw-in profiles are not interchangeable even on similar-looking doors.
Measure the actual door opening if the unit has been repaired, reskinned, or had hardware swapped before.
If anything doesn't line up cleanly, send photos of the data plate and the door gasket itself through the contact page before ordering; a five-minute check beats returning the wrong gasket.
What to do if your part number isn't listed here
If your True unit's part number doesn't match anything above, it's most likely an older or discontinued door that isn't in wide circulation anymore. That doesn't mean the unit is done.
The Gasketeers fabricate custom gaskets from the existing seal profile on discontinued True doors, matching the original thickness, corner shape, and mounting style even when True itself no longer lists the part. Bring in the old gasket, even in rough shape, and a new one gets built to match it.
Frequently asked questions
What gasket does a True T-49 take?
A True T-49 or T-49F built before 2005 takes gasket part 810803. Units built in 2005 or later take part 810719 on the same door opening, so check the data plate's build date before ordering either one.
What is True part 810803?
True part 810803 is the door gasket used on T-49 and T-49F reach-in refrigerators manufactured before 2005. It was replaced by part 810719 on units built from 2005 onward, even though the model number stayed the same.
Why are there two gaskets for the same True model?
True updates gasket profiles and door hardware mid-production without changing the model number printed on the unit. A T-49F built in 2003 and one built in 2008 share a model number but can need entirely different gaskets because the door itself changed.
Where is the model number on a True refrigerator?
The model number sits on a data plate mounted inside the door frame or on the compressor compartment wall of most True units. The same plate usually lists the serial number and a date code, both of which help confirm which gasket profile the door actually needs.